NL Instructions for use HS1-E14 Heat source
Intended use for:
This product is only intended for indoor use in dry rooms.
Only intended for use/as a replacement for salt lamps where heat is essential for operation.
Not suitable for general room lighting.
Change heat source
1. Switch off the lights and disconnect the plug(s) and/or switch off the group in the meter box
2. Allow the old heat source to cool, if necessary.
3. If fitted in a salt lamp, first carefully remove the fitting with the heat source from the stone. Wear gloves.
4. Carefully turn the heat source off counterclockwise.
5. Insert the new heat source and turn it clockwise.
6. Carefully place the heat source fitting back into the salt lamp.
7. Put the plug(s) into the socket and/or switch the group back on in the meter box.
Safety regulations
Important information • This product is not intended for use by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. • Do not allow children to play with this product.
DANGER for children • Keep containers away from children. Risk of suffocation if swallowed.
· DANGER due to electric shock
· Before use, make sure that the mains voltage is the same as the voltage of the product (see technical specifications).
· Do not use the product if the product is damaged.
· Avoid contact with water and other liquids. The lamp cannot be controlled with a conventional dimmer.
· Old appliances must not be disposed of with normal household waste.
· According to Directive 2012/19/EU, the device must be disposed of properly at the end of its life. Recyclable parts inside the device should be recycled to prevent environmental impact. Return your old device free of charge to an electronic waste collection point or recycling center.
· Please also dispose of packaging materials in an environmentally friendly manner by sorting them and depositing them in the available containers.
·
· Safety instructions
· Do not expose this lamp to moisture.
· Do not use this lamp in a reflector housing
· Do not use this lamp in closed fixtures
· Not dimmable with a conventional dimmer
· Do not use as general lighting
· Use only in salt lamps on similar applications where heat is desired.
· Use only in fixtures suitable for 7/15/25W E14
· Make sure the lamp has free ventilation; do not cover it.
· Do not touch during or immediately after use (becomes hot)
· Keep out of reach of children and animals.
· Use only on 230V mains voltage.
· Only replace the lamp when the plug is removed from the socket.
Company information:
Himalaya styling
The Stek 9F
1771SP Wieringerwerf
info@himalayastyling.nl
